Wacker Neuson 803 Notice D'utilisation page 136

Operation
Grading
Fig. 182: Grading
Excavating trenches sideways
Fig. 183: Excavating trenches sideways
3-82
• Use the stabilizer blade to fill in trenches and to grade (even out) surfaces.
Information!
Work on level ground. Grade (even out) with the stabilizer blade first in case of
sloping ground.
• The machine can be used for excavating trenches sideways in confined areas
by rotating the upper carriage and swiveling the main boom (combined position and
movement of both).
Further recommendations for digging
When planning and performing digging work, we recommend that you observe the follow-
ing points:
• Exits from pits must be outside the digging line and as level as possible.
• Dig by removing adjacent strips if possible.
• Ensure that you can travel forward when traveling out of the digging area with a fully
loaded bucket.
• Whenever possible, travel in reverse when transporting a full bucket down a steep slope.
Freeing the machine
If the machine gets stuck in the ground:
Dump out/rotate the bucket until the blade/teeth are vertical above the ground
Lower the boom all the way
Slowly dump out the bucket
The machine is pushed backward
Reverse slowly
Repeat this procedure until the tracks reach firm ground
Reverse the machine away
OM 803 us – Edition 3.7 * * 803b340.fm