Wacker Neuson 803 Notice D'utilisation page 30

Introduction
Fig. 38: Do not use ether
Fig. 39: Do not drill holes or weld the ROPS structure
Fig. 40: Explosion hazard
Fig. 41: Electric shock hazard
1-20
Meaning
Attention! Severe injury hazard.
Explosion hazard.
Do not use ether!
This machine is equipped with an intake-air preheating system. Using ether can cause
explosions or fire, which in turn can cause death or serious injury.
Position
In the engine compartment on the air intake hose
Meaning (option, only for machines equipped with ROPS bar)
Attention! Severe injury hazard.
Structural damage, roll-over accidents, retrofitting work, structural modifications or
improper repair work affect the protective effect.
Do not drill holes or perform welding on this structure. Have the machine serviced and
repaired only by a Wacker Neuson service center.
Position
On the ROPS bar
Meaning
Explosion hazard.
Connecting jump leads incorrectly can cause explosions and personal injury with possible
death.
Always wear safety glasses and protective clothing.
Follow the specific battery safety instructions!
Position
Near the battery
Meaning
Electric shock hazard.
Keep a safe distance from high-voltage lines. Always keep a safe distance from electrically
conductive parts with the machine and the equipment.
Position
On the control stand
OM 803 us – Edition 3.7 * * 803b110.fm