Wacker Neuson 803 Notice D'utilisation page 137

3.21 Grading
Grading
OM 803 us – Edition 3.7 * 803b340.fm
Warning! WARNING
Accident hazard when grading!
Can cause serious injury or death.
• Ensure that no one is in the danger zone when working with the stabilizer blade
Lower the stabilizer blade to the ground
– see chapter Stabilizer blade operation on page 3-22
Set the depth of the layer you want to remove with the stabilizer blade lever
The machine must not be raised by lowering the stabilizer blade
The clearance between the stabilizer blade and the ground should be about 1 cm
Operation
3-83