Wacker Neuson 803 Notice D'utilisation page 162

Maintenance
Fig. 209: Swiveling console lubrication point
Lubricating the live ring (ball bearing)
11
Fig. 210: Lubrication points of live ring (ball bearing)
Fig. 211: Rotate the upper carriage by 90° at a time
5-22
A further lubrication point is located on the right on the swiveling console.
Apply grease to lubrication point 10 with a grease gun.
Remove ejected grease.
10
1
2
3
4
5
6
7
8
9
DANGER
Crushing hazard! Do not rotate the upper carriage during
lubrication.
Serious crushing hazard causing death or serious injury.
• Stop and park the machine
page 5-21.
• Do not rotate the upper carriage.
Park the machine on firm, level and horizontal ground.
Lower the boom and the stabilizer blade to the ground.
Stop the engine, remove the starting key and carry it with you.
Raise the lock lever.
Apply grease to lubrication point 11 with one stroke of the grease gun.
Start the engine, raise the boom and the stabilizer blade.
Rotate the upper carriage by 90°.
Repeat steps 2 – 7 three times until the upper carriage is back in its initial position.
Rotate the upper carriage several times by 360°.
– see chapter Parking the machine on
OM 803 us – Edition 3.7 * * 803b520.fm