Endress ESE 3000 i Traduction De La Notice Originale page 104

Maintenance
EN
Checking the oil
level
42
CAUTION!
The engine and operating equipment on the generator can get very hot
while running.
Risk of burns
► Never touch any engine parts (in particular the exhaust system) for a few min-
utes after ceasing operation.
► Allow the engine to cool off for at least five minutes before changing or check-
ing the engine oil.
Fig. 9-2 Checking and changing engine oil
1. Loosen the four screws on the maintenance flap Fig. 6-3
maintenance flap.
2. Loosen the yellow screw plug
TION! The oil dipstick attached to the screw is wetted with oil.
3. Read off the oil level on the
dle between the "L" and "H" markings and never above the "H" marking.
and remove it from the filling opening. CAU-
oil dipstick. This should not be below the mid-
Fig. 9-3 Oil dipstick
and remove the