NewTom GIANO Prescriptions De Sécurité Et Instructions Pour L'opérateur page 5

1. INTRODUCTION AND INDICATIONS FOR USE
GIANO/VG3 is an extraoral X-ray system for digital panoramic X-rays, tele-X-rays and tomograms suitable for:
(I) Production of orthopanoramic images of the maxillofacial region, diagnostic examination of the dentition (teeth),
arches and other structures of the oral cavity.
(II) Production of X-rays of the arches, parts of the cranium and the carpus for cephalometric examinations if equipped
with a tele-X-ray arm (CEPH).
(III) Production of tomographic images of the oral cavity and maxillofacial structures, diagnostic examination of the
dentition (teeth), arches, oral cavity structures and some cranium bones if equipped with the CBCT option.
The system performs tomographic examinations with acquisition of a 360-degree rotary sequence of X-ray images and
reconstruction of a three-dimensional matrix of the volume examined, producing two-dimensional views of this volume
and displaying renderings of both two-dimensional and three-dimensional images. This technique is known as CBCT
or CB3D.
GIANO/VG3 is a digital image reproducer suitable for expert professionals of the sector and allows easily and
automatically obtaining highly detailed and accurate dental images with a low radiation dose. GIANO/VG3 is a digital
system. The image is acquired by means of an X-ray detector and an X-ray source with constant potential powered by
a high-frequency high-voltage generator. is a digital image reproducer suitable for expert professionals of the sector
and allows easily and automatically obtaining highly detailed and accurate dental images with a low radiation dose.
GIANO/VG3 is a digital system. The image is acquired by means of an X-ray detector and an X-ray source with constant
potential powered by a high-frequency high-voltage generator. The image is then transferred to a computer in real-time
(2D or 3D) or subsequently (2D) depending on the needs and choice of the operator.
GIANO/VG3 allows the following projections:
- Standard or paediatric panoramic views (PAN);
- Full or partial views of the dentition selected by the user (DENT);
- Frontal and lateral view of the maxillary sinuses (SIN);
- Lateral and posteroanterior view of the temporomandibular joints (TMJ) from several angles.
If the tele-X-ray arm (CEPH) is fitted, GIANO/VG3 allows the following projections:
- Cephalograms in standard or paediatric laterolateral view;
- Cephalograms in anteroposterior and posteroanterior view;
- X-ray of the hand (carpus).
If equipped with the CB3D option, GIANO/VG3 also allows tomographic images.
GIANO/VG3 is suitable for use in dentistry in the following sectors:
- Endodontics;
- Periodontology;
- Dental prostheses;
- Functional diagnostics and treatment of craniomandibular dysfunctions;
- Surgical dentistry;
- Implantation;
- Maxillofacial surgery;
- Orthodontics.
Contraindications:
- Viewing cartilaginous structures;
- The CBCT technique has a limited capability of detecting soft tissues.
EN OPERATOR'S MANUAL
5