Publicité
10
Annexe C – Autres fonctions de la transmission Allison
LISTE ET DESCRIPTION DES CODES D'ANOMALIE (DTC)
TRANSMISSION ALLISON 5IÈME GÉNÉRATION
DTC
C1312
Retarder Request Sensor Failed Low
C1313
Retarder Request Sensor Failed High
P0122
Pedal Position Sensor Circuit Low Voltage
P0123
Pedal Position Sensor Circuit High Voltage
P0218
Transmission Fluid Over Temperature
P0562
System Voltage Low
P0602 TCM Not Programmed
P0604 Control module random access memory (RAM)
P0614
Torque Control Data Mismatch ECM/TCM
P0634
TCM Internal Temperature Too High
P0642
Sensor Reference Voltage "A" Circuit Low
P0643
Sensor Reference Voltage "A" Circuit High
P0657
Actuator Supply Circuit Voltage 1 Open (HSD 1)
P0658 Actuator Supply Voltage 1 (HSD1) Low
P0659
Actuator Supply Voltage 1 (HSD1) High
P0703
Brake Switch Circuit Malfunction
P0708
Transmission Range Sensor Circuit High Input
P070C
Transmission Fluid Level Sensor Circuit – Low Input
P070D Transmission Fluid Level Sensor Circuit – High Input
P0712
Transmission Fluid Temperature Sensor Circuit Low Input
P0713
Transmission Fluid Temperature Sensor Circuit High Input
Description
CHECK
Inhibited Operation
Light
Description
May inhibit retarder operation if not
No
using J1939 datalink
May inhibit retarder operation if not
No
using J1939 datalink
Use default throttle values. Freezes
No
shift adapts.
Use default throttle values. Freezes
No
shift adapts.
Yes
Use default sump temp
No
Inhibit TCC Operation, DNA
Yes
Lock in Neutral
Yes
Lock in Neutral
Allows operation only in reverse and
Yes
second range.
Yes
SOL OFF (hydraulic default)
Yes
Default sensor data used
Yes
Default sensor data used
SOL OFF, DNA, Inhibit TCC operation,
Yes
Inhibit main modulation
Yes
DNS, SOL OFF (hydraulic default)
Yes
DNS, SOL OFF (hydraulic default)
No Neutral to Drive shifts for refuse
packer.
TCM
No
operation if a TPS code is also
active.
Ignore
defective
Yes
inputs
No
None
No
None
Yes
Use default sump temp
Yes
Use default sump temp
inhibits
retarder
strip
selector
Publicité
