Customer Parameters - Faema Faemina Utilisation Et Installation

16.9. CUSTOMER PARAMETERS

1
Use the and keys to position the cursor (white line)
on the desired line and then press the
CUSTOMER PARAMETERS
SERVICE TIME
mBoiler
Boiler
Buzzer
Flush
CUSTOMER PARAMETERS
MEASUREMENT UNITS
REPLACE FILTER
LANGUAGE
2
Pressing the key at the line "service time", the display
will show:
The parameters, related to the SERVICE TIME MENU,
that can be changed are:
- ON time (switch-on time);
- OFF time (switch-off time);
- Standby function (OFF/10' ÷ 4h00');
SERVICE TIME
DATE AND TIME
time ON
time OFF
Standby
Wash
3
and subsequently:
SERVICE TIME
Refill
4
To change the date and time press
key.
corresponding line; the display will show: the message:
+ 
ON
ON
100%
2" 
5
Other changes:
- ON time (switch-on time);
- OFF time (switch-off time);
- Standby function (OFF/10' ÷ 4h00');
- Washing (programmable washing time);
+ 

+ 
- Change (time-programmable water change);
00:00
00:00
OFF
OFF 
+ 
OFF
Pressing

CUSTOMER PARAMETERS.
DATE AND TIME
Year 21
Month 05 MAG
Date 27 THU
Hours 16
Minutes 21
IT IS a programmable washing time; at the time set the
display will show "PERFORM COFFEE WASH".
When it is required, it provides for the execution of a
wash, in the ways described in the paragraph "Cleaning
operations".
To set the time at which the wash request appears do
as follows:
- position the cursor above the line WASH;
press the key;
- change the value, using the
- press the OK key to confirm the information.
To not activate this wash set OFF at the time. OFF is
displayed pressing the
is "00:00".
NOTE: The technical personnel has the ability to enable
or disable the "block" function.
With "block" enabled, if the washing cycle is not
performed within an hour, the machine prevents
beverages from being dispensed.
The "Water Change" function with time request is set by
the technical personnel who can also enable or disable
the "block" function.
With "block" enabled, if the water change is not done
within an hour, the machine prevents beverages from
being dispensed.
With a scheduled time request, the user can only
change the time the request appears.
To change the time proceed as follows:
- position the cursor above the line Water Change;
press the key;
- change the value, using the
- press the OK key to confirm the information.
takes you back to the previous menu
the key at the
+ 

and keys;
key when the time indicated
and keys;
33