Customer Programming; Clock Adjustment; Customer Parameters Menu; Language Selection - Faema BARCODE Traduction Des Instructions D'origine

CUSTOMER PROGRAMMING

16. Clock adjustment

Use the "+" (30) and "-"
The time increases (or decreases) one minute each time the
key is pressed.
If one of the keys (30 or 31) is pressed and held down for more
than 10 seconds, the minutes setting stops and the hours
setting increases (or decreases).
During the time setting phase, the seconds remain at "00".

17. Customer parameters menu

To access "Customer parameters" press
following message will appear on the display:
To display the messages in a different language from that set,
after entering into Programming mode, position the cursor
on the desired language by pressing the "+"
(31) keys and then pressing the PRG
machine will restart with the messages provided in the selected
language.
The display (5) provides a choice of the following languages.:
Italian, English, German, French, Polish, Spanish, Portuguese,
Dutch, Japanese and Russian.
(31) keys to adjust the clock.
(34) key; the

Language selection

(30) and "-"
(29) key. The
10 March 2010
wednesday
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
77
15:15:04
+ u
u
+ u
u