Faema Faemina Utilisation Et Installation page 62

CLEANING THE UNIT - This operation must be carried out at the end of each working day
For the operations described below, use the one-way filter holder
1
Remove the filter holder
from the coffee group.
5
Access is gained to customer
programming pressing the
key for 5 seconds.
9
N.B. first you are asked:
- to empty the basin
- to insert the filter holder
Also check that the tank is
filled to the maximum level
with water.
13
07 MAY 21
Friday 16:03:01
REMOVE FILTER HOLDER
push 1
to confirm
At the end of wash cycle,
the message "REMOVE
GROUP FILTER HOLDER"
will appear.
NOTE. When in image mode
the following screen will be
on the display:
Press the key and hold it to
return to text message mode.
18
2
Using a brush, clean the
cover gasket.
6
Press the key.
10
Hook the filter holder to the
group.
14
2 3
Remove the filter holder.
! ! ! ! ! !
GROUP 1 LOCKED
EXECUTE WASHING
! ! ! ! ! !
3
Insert the rubber disk into
the filter holder.
7
CUSTOMER PROG.
CUP WARMER
WASHES
WATER CHANGE
LIGHTS
SELF LEARNING
Use the
position the cursor (white
line) on the desired line and
then press the
11
Press the
15
Press the
The washing is interrupted and blocks the
! ! ! !
machine if, after starting it, the machine is
switched off or if the machine detects tank empty
or discharge basin full.
! ! ! !
4
Position a detergent tablet
8
Entering the related Menu, the
+ 
machine washing operations
begin.

and keys to
key.
Press the
12
Then the washing begins:
Friday
key.
16
The message "GR1 RINSE"
will appear.
Friday
The washing cycle is
key.
complete after the rinsing
phase.
Washes
confirm
key.
07 MAY 21
15:59:03
GR1 WASH
005 %
Do not remove the
filter holder during
dispensing.
07 MAY 21
16:03:14
GR1 RINSE
072 %