Faema Faemina Utilisation Et Installation page 75

Masquer les pouces Voir aussi pour Faemina:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 79
16.6. LIGHTS
The machine features red rear lighting which can be activated
when the machine is started.
1
Use the
and
keys to position the cursor (white line)
on the desired line and then press the
The following message will appear on the display:
LIGHTS
Machine
24/7
Groups
16.7. SELF LEARNING
Use the
and
keys to position the cursor (white line) on
the desired line and then press the
1
Coffee dose setting
1 - Connect the filter holder with the dose of ground
coffee to the unit.
2 - Place the cup or cups underneath the nozzle(s) of
the filter holder and press the key to be programmed.
Keep the key pressed until the desired level is
reached in the cup or cups.
SELF-LEARNING
key.
+ 
25%
NO
100%
key.
2
This menu allows adjustment (percentage) of the
machine lights. Specifically:
- Machine (rear lighting).
- 24 / 7 (permanent lighting).
- Group (group lights).
Set the desired values using the
The changes will be applied after the data entered is
confirmed with the OK key.
The permanent lighting (24/7) is not adjustable, and
the only options are ON (the lighting comes on when
the machine is started up) or OFF.
During this phase, the value of the pulses of the
volumetric dispensing device (at the top of the
display) is increased. When the button is released,
the value reached is recorded and appears under
the key programmed (in the example "0090").
3 - Continue to programme all the coffee keys, repeating
the steps from number 1.
At the end, confirm the changes made and exit the
menu by pressing the hot-water-dispensing push button:
and
keys.
31

Publicité

Table des Matières
loading

Table des Matières