Customer Programming; Data Ow Chart; Service Time Menu - Faema E71 Utilisation Et Installation

CUSTOMER PROGRAMMING

19. Data ow chart

Access the programming menu by pressing the icon
1
Press the icon
AUTOMATIC SWITCH OFF / SWITCH
ON
The machine can be set to switch off and
switch on at programmed times.
During the machine off phase, the
display light is dimmed.
Note. When the machine is working in
the automatic on/off function do not
use the general switch (1) to switch
off the machine. If this happens, the
machine will not be able to switch on
again automatically.
FORCED SWITCH ON
Push any dispensing button to turn it on.
Note. Forcing the machine on does
not change the programmed
on/off times.
Note. At this point the machine will
remain on until the next switch
off time is reached.
To immediately return the machine to
"off" as originally programmed, switch it
off and on again using the general on-off
switch (1).
02_E71_2PRG_1646.indd 21
2a
Access the service hours menu by
.
pressing the icon
2b
Press the icon
2c
Press the icon
Return to the previous menu or exit the programming
.
menu by pressing the icon

Service time menu

.
to set the time.
to set the date.
21 EN
.
These parameters can be con gured:
USE - timed switch-on/switch-off:
YES, NO, Eco (during the switch-off
phase, the machine resistance is not
completely disabled and allows the
boiler pressure to remain at 0.2 bar).
ON - (switch-on time);
OFF - (switch-off time);
CLOSED - (day of closure).
These parameters can be con gured:
HOUR, MINUTES, STYLE - (24:00 or
AM/PM).
These parameters can be con gured:
DAY, MONTH, YEAR.
17/11/2016 13:47:41