REMS CamScope Notice D'utilisation page 13

eng
3.5. Play photo/video
The controller unit (7) of REMS CamScope and REMS CamScope S auto-
matically creates a folder with the current date on the MicroSD card to save
photos/videos.
REMS CamScope:
Press the menu button (11) briefly. Select the desired date with the Up/Down
buttons (10/12) and press the OK button (9). Recorded photos/videos are
displayed in a list. Select the appropriate photo/video with the Up/Down buttons
and press the OK button to display the photo/video. After looking at the picture,
press the menu button (11) and return to the list. Press the OK button to play
the video.
Other functions are available whilst playing the video.
● Press the OK button (9) for pause, press the OK button again to end the
pause.
● Press the Up button (10) for fast forward, press the OK button to end it.
● Press the Down button (12) for fast rewind, press the OK button to end it.
● Press the Menu button (11) to exit video playback.
REMS CamScope S:
Press the Play Photo/Video button (23). Select the desired date with the Up/
Down buttons (10/12) and press the OK button (9). Recorded photos/videos
are displayed in a list. Select the appropriate photo/video with the Up/Down
buttons and press the OK button to display the photo/video. After looking at the
picture, press the menu button (11) and return to the list. The list of recorded
photos/videos appears after playing the video. The controller unit does not have
a built-in loudspeaker, the video voice recording is played with a suitable
computer.
Other functions are available whilst playing the video.
● Press the OK button (9) for pause, press the OK button again to end the
pause.
● Keep the Up button (10) pressed for about 1 s for fast forward, press the
OK button to end it.
● Keep the Down button (12) pressed for about 1 s for fast rewind, press the
OK button to end it.
● Press the Play Photo/Video button (23) twice to exit video playback.
REMS CamScope Wi-Fi:
The application software for Android automatically creates a folder on the
Smartphone/Tablet-PC for saving the photos and videos. The name of the folder
is REMS. Tap the Play Photo/Video button (23) to show the recorded photos/
videos from the application software. By briefly tapping a photo/video, the photo
is displayed large or the video played. By touching a photo/video in the displayed
list for longer, it is possible to send/transfer it with the application software
installed on the Smartphone/Tablet-PC. See the operating instructions of the
Smartphone/Tablet-PC and the application software. It is possible to open the
photos/videos outside the REMS application software, see the operating instruc-
tions of the Smartphone/Tablet-PC.
5. Faults
5.1. Fault: No picture in the display (19) of the controller unit (7) or in the Smartphone/Tablet-PC.
Cause:
● Camera cable set Color (2) not fitted correctly.
● Wireless range exceeded.
● Battery of controller unit (7) or Smartphone/Tablet-PC empty.
● Batteries of the handheld unit (5) empty. In the REMS CamScope Wi-Fi the
Power-LED (6) then lights red.
● WLAN on the Smartphone/Tablet-PC is switched off (REMS CamScope
Wi-Fi).
● Fault on wireless connection between the handheld unit (5) and the
controller unit (7) or the Smartphone/Tablet-PC.
● Electrical device defective.
5.2. Fault: Display (19) does not change although the camera is moved or a button pressed.
Cause:
● Display (19) does not change (REMS CamScope, REMS CamScope S).
● Display of the Smartphone/Tablet-PC does not change (REMS CamScope
Wi-Fi).
5.3. Fault: It is not possible to record photos/videos (REMS CamScope, REMS CamScope S).
Cause:
● MicroSD card not inserted.
● MicroSD card defective.
With the application software for iOS, the recorded photos/videos are displayed
in a list by tapping the Play Photo/Video button (23). By briefly tapping a photo/
video, the photo is displayed large or the video played. The recorded photos/
videos can only be sent/transferred outside the REMS application software.
See the operating instructions of the Smartphone/Tablet-PC and the application
software.
3.6. Delete Photo/Video folder
REMS CamScope:
Select the photo/video or folder to be deleted as described in 3.5 and press
the Menu button (11) for about 2 s. Select "Yes" in the security prompt with the
Up/Down buttons and confirm with the OK button (9). A folder can only be
deleted if it contains no photo/video.
REMS CamScope S:
Select the photo/video or folder to be deleted as described in 3.5 and press
the Delete/Zoom button (22). Select "Checkmark" in the security prompt with
the Up/Down buttons and confirm with the OK button (9).
REMS CamScope Wi-Fi:
In the application software for Android, select the photo/video to be deleted as
described in 3.5 and activate the delete function by touching for longer.
With the application software for iOS, the recorded photos/videos can only be
deleted outside the REMS application software.
4. Maintenance
WARNING
Pull out the mains plug before maintenance work!
4.1. Maintenance
Clean the electrical device regularly especially when it has not been in use for
a long time.
Clean plastic parts (e.g. housing) only with REMS CleanM machine cleaner
(Art. No. 140119) or a mild soap and a damp cloth. Do not use household
cleaners. These often contain chemicals which can damage the plastic parts.
Never use petrol, turpentine, thinner or similar products for cleaning. Only clean
the display (19) of the controller unit (7) with a suitable, soft, dry cloth. Make
sure that no dirt gets into the cable plug/socket (3) of the camera cable set
Color (2) or the handheld unit (5) or into the connection sockets (13,14,16) and
MicroSD card slot (15) of the controller unit (7).
Make sure that liquids never get onto or inside the electrical device. Never
immerse the electric device in liquid.
4.2. Inspection/repair
Service and repair work are not possible in the REMS CamScope, REMS
CamScope S and REMS CamScope Wi-Fi.
Remedy:
● Fit the camera cable set Color as described in 2.2.
● Reduce distance between handheld unit (5) and controller unit (7).
● Charge the battery, see appropriate operating instructions.
● Change the batteries of the handheld unit, see 2.1.
● Switch on WLAN, see operating instructions of the Smartphone/Tablet-PC.
● Fix the controller unit to the handheld unit in REMS CamScope and REMS
CamScope S. If the Power-LED (6) lights red or does not light on CamScope
Wi-Fi, switch off the handheld unit at the On/Off thumbwheel (4) and switch
back on after a short time.
● Have the electrical device checked by an authorised REMS contract customer
service workshop.
Remedy:
● Press the Reset button carefully (20) for example with a straightened paper
clip.
● Exit application software, restart, see operating instructions of the Smartphone/
Tablet-PC.
Remedy:
● Insert MicroSD card, see 2.3.2.
● Change MicroSD card, see 2.3.2.
eng