REMS CamScope Notice D'utilisation page 11

eng
1.1. Supply format
REMS CamScope
REMS CamScope S
REMS CamScope Wi-Fi
* Supply format:
Handheld unit, 4 batteries 1.5 V, AA, LR6, controller unit, MicroSD-card 2 GB, power supply/charger unit, USB cable, video cable, case
1.2. Article numbers
Camera cable set Color 16-1
Camera cable set Color 16-1 90°
Camera cable set Color 9-1
Camera cable set Color 4.5-1
900 mm push cable extension
REMS CleanM
1.3. Handheld unit
Wi-Fi standard
Transmission frequency
Pixel image transfer
Modulation
Bandwidth
Wireless range
Power supply
Dimensions
Weight
1.4. Controller unit
Display
Pixels (display)
Pixels (recording)
Video system
Reception frequencies
Transmission channel
Battery
Power supply/charger
Video level
Video size
Frame rate
Zoom
Dimensions
Weight
Temperature range
Humidity
Tested units for
REMS application software
1.5. Camera cable set Color
Image sensor
Number of pixels
Viewing angle
Focus range
Min. lighting
Power supply
Dimensions
Weight
Video format
Type of protection camera
2. Start-up
2.1. Handheld unit (5)
Remove the screw from the battery compartment (17) of the handheld unit (5)
(only in REMS CamScope), push the cover in the direction of the arrow to
remove, remove the battery holder, insert 4 1.5 V, AA, LR6 batteries into the
battery holder, pay attention to the position of the plus-minus poles. Push the
battery holder back into the battery compartment, slide in the cover, screw in
the screw (only in REMS CamScope). Always change all four batteries at once.
2.2. Camera cable set Color (2)
Plug the camera cable set Color into the cable socket (3) of the handheld unit
Set 16-1
175110
* Supply format
Camera cable set Color 16-1
Add-on mirror, add-on hook
Add-on magnet
175130
* Supply format
Camera cable set Color 16-1
Add-on mirror, add-on hook
Add-on magnet
175140
Handheld unit
4 1.5 V, AA, LR6 batteries
Camera cable set Color 16-1
Add-on mirror, add-on hook
Add-on magnet
Operating instructions, case
175103
175106
175104
175102
175105
140119
REMS CamScope
2468 MHz
FM
18 MHz
up to 10 m
4 batteries 1.5 V, AA, LR6
190 × 140 × 40 mm
260 g
REMS CamScope
3.5" colour TFT-LCD
320 × 240
640 × 480
PAL / NTSC
2414, 2432, 2450, 2468 MHz
not adjustable
integrated Li-Ion battery 3.7 V, 1.2 Ah
100 – 240 V AC, 50 – 60 Hz, input /
5 V DC, 1 A, output, protection class II
0.9 – 1.3 Vpp on 75 Ohm
27 MB per minute
up to 30 frames per second
1.5 / 2.0 / 2.5 / 3.0 ×
100 × 70 × 25 mm
150 g
–10°C ... +50°C / +14°F ... +122°F
15 – 85% RH
16 mm camera 16 mm camera, 90°
CMOS CMOS
704 × 576 656 × 488
50° 35°
60 – 350 mm 35 – 80 mm
0 Lux 0 Lux
by handheld unit by handheld unit
Ø 16 × 970 mm Ø 16 × 970 mm
280 g 185 g
PAL PAL
IP 67 IP 67
≤ 30 min, ≤ 0.1 bar ≤ 30 min, ≤ 0.1 bar
Set 9-1
175111
* Supply format
Camera cable set Color 9-1
Add-on mirror, add-on hook
Add-on magnet
175131
* Supply format
Camera cable set Color 9-1
Add-on mirror, add-on hook
Add-on magnet
175141
Handheld unit
4 1.5 V, AA, LR6 batteries
Camera cable set Color 9-1
Add-on mirror, add-on hook
Add-on magnet
Operating instructions, case
REMS CamScope S
2468 MHz
FM
18 MHz
up to 10 m
4 batteries 1.5 V, AA, LR6
190 × 165 × 53 mm
320 g
REMS CamScope S
3.5" colour TFT-LCD
320 × 240
640 × 480
PAL / NTSC
2414, 2432, 2450, 2468 MHz
not adjustable
integrated Li-Ion battery 3.7 V, 1.2 Ah
100 – 240 V AC, 50 – 60 Hz, input /
DC 5 V / 1 A, output, protection class II
0.9 – 1.3 Vpp on 75 Ohm
27 MB per minute
up to 30 frames per second
1.5 / 2.0 / 3.0 ×
105 × 90 × 42 mm
240 g
–10°C ... +50°C / +14°F – +122°F
15 – 85% RH
9 mm camera
CMOS
640 × 480
36°
20 – 100 mm
0 Lux
by handheld unit
Ø 9 × 970 mm
190 g
PAL
IP 67
≤ 30 min, ≤ 0.1 bar
(5). Position the strap of the camera cable set in line with the groove of the
handheld unit. Tighten the camera cable set hand-tight with the union nut of
the handheld unit.
The tools, add-on mirror, add-on hook, add-on magnet delivered with the camera
cable set Color 16-1 only fit the camera cable set Color 16-1 and are clipped
optionally to the camera head. Always close the flap otherwise the tool could
be lost.
The enclosed accessory set does not fit camera cable set Color 9-1. First push
the plastic sleeve over the wire of the tool of the add-on mirror, add-on hook
or add-on magnet. Hook the hook of the tool on the camera head into the hole
in the camera housing marked by an arrow. Align the plastic sleeve so that the
eng
Set 4,5-1
175112
* Supply format
Camera cable set Color 4,5-1
175132
* Supply format
Camera cable set Color 4,5-1
175142
Handheld unit
4 1.5 V, AA, LR6 batteries
Camera cable set Color 4,5-1
Operating instruction, case
REMS CamScope Wi-Fi
IEEE 802.11 b/g/n
2.4 GHz
640 × 480
up to 10 m
4 batteries 1.5 V, AA, LR6
245 × 130 × 43 mm
250 g
REMS CamScope Wi-Fi
see operating instructions
Smartphone/Tablet-PC
see www.REMS.de under
DOWNLOADS/Software/Compatibility
4.5 mm camera
CMOS
320 × 240
63°
10 – 50 mm
0 Lux
by handheld unit
Ø 4.5 × 1030 mm
30 g
NTSC
IP 67
≤ 30 min, ≤ 0.1 bar