Create A Port Mirroring Group; Edit A Port Mirroring Group - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management

5.3.2 Create a Port Mirroring Group

To create a port mirroring group, select the source port(s) and the destination port, then select the mirroring group (Figure 5.7). Click "Save".
Figure 5.7: Create a Port Mirroring Group

5.3.3 Edit a Port Mirroring Group

Click the icon next to the port mirroring (Figure 5.8) group to edit its source and destination ports.
Note: Mirror Group ID number cannot be edited once assigned.
Figure 5.8: Edit or Delete a Port Mirroring Group
18