Dhcp Relay; Dhcp Relay Agent Configuration; Option82 Configuration; Circuit Control - Tripp-Lite NGS Serie Guide De L'utilisateur

10. DHCP Relay

The DHCP Relay sends DHCP messages between DHCP clients and DHCP servers on different IP networks. In this area, relay and Option82
settings can be edited.

10.1 DHCP Relay Agent Configuration

Select DHCP RELAY DHCP Relay (Figure 10.1). Click the checkbox to enable DHCP Relay. By default, "DHCP Option Trust Field" is already
enabled.

10.2 Option82 Configuration

Select DHCP RELAY Option82. In the Option82 configuration (Figure 10.2) enter the following information:

10.2.1 Circuit Control

Enter the Circuit Control ID from 3-63 and the VLAN ID. Click "Save" and each instance will be saved to a list.
Figure 10.1: DHCP Relay Enabled
Figure 10.2: Option82 Circuit Control
47