Edit Storm Control Settings; Port Isolation Settings; View Port Isolation Configuration - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management

5.5.2 Edit Storm Control Settings

Select the port(s) to be configured (Figure 5.11). Click the "Storm Control Type" drop-down menu to select the type of storm control to be
configured for the port. Enter a value from 0-262143 into the "Storm Control Value" fields for Broadcast, Multicast, and Unicast packets
per second entries. If required, set Multicast Traffic and Unicast Traffic type to either "Unknown-only" or "Both" and then click "Save" to
complete the configuration for the port or ports.
Figure 5.11: Edit Storm Control Settings

5.6 Port Isolation Settings

5.6.1 View Port Isolation Configuration

Select "Port ManagementPort Isolation" to view the switch's current port isolation configuration (Figure 5.12). Port isolation prevents PCs
connected to different ports from communicating with each other (without having to setup a VLAN).
Figure 5.12 : Port Isolation Configuration
21