Adding A Vlan; Adding Multiple Vlans - Tripp-Lite NGS Serie Guide De L'utilisateur

6. VLAN Management

6.1.2 Adding a VLAN

Select "New VLAN" and enter the VLAN ID (between 2-4094) (Figure 6.2). Enter a VLAN name (limit: 31 characters). If no name is entered,
the switch defaults to a generic "VLAN0002" name. Next, select the ports to add to the VLAN and click "Save".
Note: The system will not allow duplicate VLAN IDs to be created.
Figure 6.2: Adding a VLAN

6.1.3 Adding Multiple VLANs

To quickly add multiple VLANs to the view list, select "New Multiple VLAN", enter the multiple VLAN IDs to be created and click "Save"
(Figure 6.3). All of the VLAN(s) will be created and allow settings for each VLAN to be edited.
Figure 6.3: Adding Multiple VLANs
24