Port Management; Basic Settings; View Port Configuration - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management

5.1 Basic Settings

5.1.1 View the Port Configuration
Select "Port Management Basic Settings" to view and modify port settings (Figure 5.1).
Figure 5.1: Basic Settings Page
The port list table displays the switch's port configuration information in the following columns:
• Port: Displays the switch's port number.
• Description: Displays the user-provided name or description given to the port.
• Status: Displays the port status, either "Enabled" or "Disabled".
• Port Speed: Displays either auto-negotiation, 10, 100 or 1000 Mbps
• Working Mode: Displays port duplex configuration, auto-negotiation, full duplex or half duplex.
• Mega Frame: Displays the length of jumbo frames. Default mega frame length is 1518.
• Cable Type Detection: Displays crossover configuration, auto-negotiation, MDI or MDIX.
• Flow Control: Displays if port flow control is either "On" or "Off."
Note: The copper/fiber SFP's rate can only be 1000 Mbps, and its working mode can only be auto/full duplex.
13