Configure Individual Or Multiple Ports; Port Aggregation; View Port Aggregation Configuration - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management

5.1.2 Configure Individual or Multiple Ports

Select the port(s) to be configured from the panel, then click the icon in the edit column to change the settings of each selected port.
Figure 5.2: Individual Port Configuration
Note: Within the individual port configuration screen, the following settings can be changed: Description, Status, Port Speed, Duplex Mode, Flow Control, and
Cable Type Detection settings.

5.2 Port Aggregation

5.2.1 View Port Aggregation Configuration

Select "Port Management Port Aggregation" to view the switch's port aggregation configuration (Figure 5.3). Port Aggregation (or link
aggregation) allows multiple Ethernet links to be combined into a single logical link. Network devices treat the aggregation as if it were a
single link, which increases fault tolerance and provides load distribution.
Figure 5.3: Port Aggregation
14