Quick Configuration; Adding Vlans; Adding New Vlans; Editing Vlans - Tripp-Lite NGS Serie Guide De L'utilisateur

4. Quick Configuration

Select "Quick Configuration" to configure frequently used functions of the switch, such as VLANs, trunk ports, management system, and
management interface password settings.

4.1 Adding VLANs

Select "Quick Configuration VLAN Settings" to configure the VLANs and trunk ports (Figure 4.1). You can view and edit "VLAN Settings",
add new VLANs, modify VLAN, and delete VLAN(s). After configuring the VLAN(s), go to the "Trunk Settings" to add new trunk ports.
Figure 4.1: VLAN Settings

4.1.1 Adding New VLANs

Click the "New VLAN" icon and enter the new VLAN ID, VLAN Name, and then add the selected ports for that VLAN. Click "Save" once when
finished. Repeat these steps to create additional VLANs.

4.1.2 Editing VLANs

Click on the "Edit" icon and to change the VLAN Name and the selected ports for that VLAN. Click "Save" once when finished editing.
Repeat these steps to edit additional VLANs.

4.1.3 Deleting VLANs

To delete a VLAN, click on the red icon next to the VLAN to be deleted or click the checkbox next to the associated VLAN and click
"Delete VLAN". To delete multiple VLANs, check the boxes next to the VLANs to be deleted. Click "Delete VLAN" to delete the selected
VLANs.
Note: All ports associated with the deleted VLANs will automatically return to VLAN 1. VLAN 1 cannot be deleted.
9