Port Selection - Tripp-Lite B007-008 Manuel D'utilisation

Port Selection

Controlling all the PCs connected to the Switch is very easy. The following three methods
can be used:
•
Manual
Simply press the appropriate port selection switch on the unit's front panel. The
Selected LED will light to indicate that the port is selected. The On Screen Display
(see OSD section) automatically switches to highlight the PC selected.
Note: On a daisy chained installation, you must press the Port Selection switch on
the KVM Switch that connects directly to the PC you want to access.
•
Hot Key
Press the Left [Ctrl]+[Alt]+[Shift] or Right [Ctrl]+[Alt]+[Shift] keys sequentially; key
in the Port ID number (see Port ID Numbering, section for details); then press [Enter].
•
OSD
Press either Left [Ctrl] or Right [Ctrl] twice to access the OSD Main Menu. Either:
Š
Invoke the Hotkey Function by pressing the Left [Ctrl]+[Alt]+[Shift] or Right
[Ctrl]+[Alt]+[Shift] keys sequentially; key in the Port ID (see Port ID Numbering
section for details) and then press [Enter], or
Š
Use the Arrow Keys to move the Highlight Bar to the port you want; then press
[Enter]
Note: You can change the Hotkey to access the OSD Main Menu to the Scroll Lock
Key (see section titled F6), in which case you press [Scroll lock] twice (instead of
[Ctrl] twice).
- 9 -