Other Settings; Switch Management Ip Address Settings - Tripp-Lite NGS Serie Guide De L'utilisateur

4. Quick Configuration

4.3 Other Settings

Select "Quick Configuration
management VLAN, management IP address, subnet mask, default gateway, DNS Server, device name, and management interface
password. After modifying the configuration, click "Save". Click "Finish" to return to the homepage, or click "Previous" to return to previous
settings page to further modify the configuration.
The Other Settings page shows basic system settings:
Management VLAN: The management VLAN ID of the switch defaults to 1.
Management IP: The IP address of the switch's management VLAN.
Subnet Mask: The subnet mask of the switch's management VLAN.
Device Name: The hostname of the switch.
Default Gateway: The default gateway of the switch's management VLAN.
DNS Server: The IP address of the DNS server.
Note: The management VLAN ID of the switch defaults to 1 and cannot be deleted.
4.3.1 Modify Switch Management IP Address Settings
To set the management IP address of the switch, follow these steps:
1. Enter the IP address in the "Management IP" field (e.g. 192.168.100.179). Management IP is required.
2. Enter the subnet mask in the "Subnet Mask" field (e.g. 255.255.255.0). Management Subnet Mask is required.
3. Enter device name. Device name is required.
4. Enter the gateway address in the "Default Gateway" field (e.g. 192.168.100.1).
5. Enter DNS Server IP address (e.g. 192.168.10.12).
6. Click "Save" to complete the configuration.
7. Click "Set Management VLAN" to change to another VLAN other than the default VLAN ID of 1.
Other Settings" to view the system settings (Figure 4.3). From this page, you can change the switch's
Figure 4.3: Other Settings
11