Create A Port Aggregation Group - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management
The Port Aggregation table will show the switch's current configuration.
• Aggregation Group Number: Displays the number assigned to the aggregation group.
• Aggregation Group Members: Displays the port numbers that comprise a link aggregation group.
Notes:
• Aggregation groups must contain a minimum of two ports; a maximum of eight ports can be aggregated in a group.
• Each port in a link aggregation group must use the same protocols and link speeds.

5.2.2 Create a Port Aggregation Group

To create a port aggregation group, enter a port aggregation ID, then select the ports to be added to the aggregate group. Click "Save" to
complete the configuration. When a port is part of an aggregation group, it will appear as shown in Figure 5.4.
Figure 5.4: Creating a Port Aggregation Group
15