Port Mirroring; View Port Mirroring Configuration - Tripp-Lite NGS Serie Guide De L'utilisateur

5. Port Management

5.3 Port Mirroring

5.3.1 View Port Mirroring Configuration

Select "Port Management Port Mirroring" to view the port mirroring configuration (Figure 5.6). Port mirroring selects the network traffic
for analysis by a network analyzer. This can be done for specific switch ports. Many switch ports can be configured as source ports and one
switch port is configured as a destination port. Packets copied to a destination port will be the same format as the original packet from the
source. This means that if the mirror is copying a received packet, the copied packet will be VLAN tagged or untagged as it was received on
the source port.
Figure 5.6: Port Mirroring Configuration
The Mirroring Port List shows the mirroring configuration of the switch.
• Mirroring Group: Mirror group ID; up to four mirroring groups can be created.
• Source Port(s): The port(s) the mirrored data comes from.
• Destination Port: The port receiving the mirrored data.
Notes:
• Ports in aggregation ports cannot be designated as both the source port and the destination port.
• Only one destination port can be selected per mirroring group.
17