Set Option82 Information - Tripp-Lite NGS Serie Guide De L'utilisateur

7. Fault/Safety Management

7.1.7 Set Option82 Information

Enabling Option82 allows a device to be uniquely identified on the network when a broadcast request is sent through the switch by adding
the Option82 packet information to be read by the DHCP server. To enable, click the "Client Option82 Enable" checkbox (Figure 7.6).
Provide the circuit control circuit name and VLAN ID (Figure 7.7). Once entered, click "Save". To edit, click the edit option next to the circuit
control name. Click "Save" when finished editing. Click "Cancel" to discard edits. To delete a circuit control entry from the list, click the
icon next to the circuit name to be deleted. The setting is saved to the system automatically once delete is selected.
Next, enter the remote agent "Remote Name" and VLAN ID (Figure 7.8). Click "Save" once finished. To edit, click the edit option next to the
remote agent to be changed. Click "Save" when you are finished editing. Click cancel to discard edits. To delete a remote agent entry from
the list, click the red icon next to the remote agent you want to delete. The setting is saved to the system automatically once delete is
selected.
Select the IP Address tab and enter the IP address and VLAN ID of the client
Figure 7.6: Client Option82 Enable
Figure 7.7: Option82 Circuit Control
34