Add Trunk Port Settings; Edit Trunk Ports - Tripp-Lite NGS Serie Guide De L'utilisateur

6. VLAN Management
The Trunk Port List shows the trunk port configuration of the switch.
• Port: Displays the port number.
• Native VLAN: Displays the native VLAN. By default, the switch's native VLAN is VLAN1.
• Allowed VLAN: Displays the VLANs that will be tagged when transmitted on the trunk port.

6.2.2 Add Trunk Port Settings

To add a new trunk port, click "New Trunk Port" (Figure 6.8). Select the Native VLAN (default is 1), then select the allowed VLAN(s) and click
"Save".
Figure 6.8: Adding Trunk Ports
Note: The allowed VLAN(s) must be created through VLAN Management before they can be added to a trunk port.

6.2.3 Edit Trunk Ports

Click the "Edit" icon of the Trunk Port that you want to edit. Within the Edit Trunk Port window (Figure 6.9) you can add additional trunk
ports, change the Native VLAN, and change the allowed VLANs for the selected trunk port.
Figure 6.9: Editing a Trunk Port
27