Add And Edit Dhcp Restricted Ports; Source Mac Verification - Tripp-Lite NGS Serie Guide De L'utilisateur

7. Fault/Safety Management
7.1.5 Add Edit DHCP Restricted Ports
To add DHCP Restricted Ports, go to Fault/Safety DHCP DHCP Restricted Ports. Configure the list of ports to be blocked from receiving
a DHCP addresses by selecting those ports. Once you have selected the port(s), click "Save." To edit or remove DHCP trusted ports, click
on the "Edit" icon next to the "Prohibit DHCP for Address Port List." Next, de-select the port or ports to be removed from the prohibited list.
When finished editing, click "Save."
Note: Removing all ports from the list deactivates the feature.

7.1.6 Source MAC Verification

Enabling MAC Verification ensures that if a packet is received from an untrusted interface and the source MAC and the DHCP client mac
address do not match, the switch will drop the packet.
To enable, click the "MAC Verification Enable" checkbox (Figure 7.5). Next, add the source MAC address and click "Save." Once enabled it
will provide the status of various devices enabled or set to have packet traffic intentionally blocked.
Figure 7.5: MAC Verification
33