Identification Data - Zhermack Zetaclave B 18 Manuel D'utilisation

MAINTENANCE AND USE MANUAL
The equipment described in this manual has an ID platelet giving information about both the
machine and the manufacturer.
A. Name and address of manufacturer
B. Equipment code and model
C. Serial number
D. Power supply information
A
B
D
The equipment has been built in compliance with the EC directives listed in the enclosed "EC
decoration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or the damage the plate as you must be able to read the data at
all times.
On the equipment there is a label with the following symbol. It reads:
WARNING! RISK OF ELECTRIC SHOCK. DO NOT OPEN OR REMOVE DOORS OR GUARDS
BEFORE DISCONNECTING THE PLUG FROM THE MAINS.
ATTENZIONE! READ CAREFULLY THE INSTRUCTIONS OF THE USER'S MANUAL
WARNING! HIGH HEAT DANGER. YOU MUST USE PROPER TWEEZERS AND THERMAL
PROTECTING GLOVES.
A proper earth connection is compulsory. Should it temporarily be necessary to use an
extension lead the latter must comply with the standards in force in the country of use.
zetaclave B
EN
Zhermack S.p.A. | via Bovazecchino, 100
45021 Badia Polesine (RO) Italy | T +39 0425 597 611
C306550 ZETACLAVE B 18l
SN:20000000
230V~50/60Hz 11A 2400W

IDENTIFICATION DATA

A
Zhermack S.p.A. | via Bovazecchino, 100
45021 Badia Polesine (RO) Italy | T +39 0425 597 611
B
C306552 ZETACLAVE B 23l
C
SN:20000000
D
230V~50/60Hz 11A 2400W
On-equipment warnings
3.4
C
3.4.1
147 of 228