Control Panel - Zhermack Zetaclave B 18 Manuel D'utilisation

MAINTENANCE AND USE MANUAL
In order to understand and use the controls correctly, please refer to paragraphs 3.3.1, 3.3.2 and 3.3.3.
DISPLAY (par. 3.3.2)
DOOR
This button opens
the door at the end
of the cycle. By
keeping this
pressed you can see the
total STR+DRY time and
the cycle counter.
Keep the door pushed in
until the display shows
the door locked icon. To
close the door, it is NOT
necessary to press the
START button as the
motor starts
automatically. To start
the cycle, press the
START button once the
door is closed.
STERILISATION CHAMBER
TEMPERATURE
STERILISATION
BY KEEPING
PRESSED THE
DOOR BUTTON
YOU CAN SEE THE TOTAL
TIME AND
THE CYCLE
COUNTER OF THE
AUTOCLAVE.
zetaclave B
EN
022.5°C
15:00min
022.5°C
085.9°C
15:00min
16:00 str
TIME
0.01bar
vacuum test
10:00 dry
VUOTO 1
0.01bar
-0.12bar
vacuum test
121° cavi imbustati
10:00 dry
10:00 dr
VUOTO 1
VUOTO 1
INDICATOR ICONS (paragraph 3.3.3)

CONTROL PANEL

Keyboard
SELECT
This button selects the
cycle required. Also
used to enter the USER
MENU (paragraph 6.9).
PUMP
Use to fill the tank with
water. Hold it down for
at least 5 sec. for the
resin reset procedure
("reset resins").
START/STOP
Starts the cycle.
While the cycle is
running, holding the
button down for
longer than 1 sec. will
stop the cycle.
Display
PRESSURE IN
STERILISATION
CHAMBER
SELECTED
CYCLE
DRYING
TIME
CURRENT CYCLE
PHASE
145 of 228
3.3
3.3.1
3.3.2