Identification Data - Zhermack SAND S23 Mode D'emploi

MAINTENANCE AND USE MANUAL
The equipments described in this manual has an ID platelet giving information about both the
equipment and the manufacturer (the example in the diagram are the SAND S25R):
A. Name and address of manufacturer
B. Equipment code and model
C. Serial number
D. Power supply information
The equipments are built in compliance with the EC directives listed in the enclosed "EC
decoration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or the damage the plate as you must be able to read the data at
all times.
SAND S 23 / S 24 / S 24 R / S 25 / S 25 R
EN
A
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
D

IDENTIFICATION DATA

Zhermack S.p.A. - via Bovazecchino, 100
C305606 - SAND25 R
SN:20000000
230V~50/60Hz 9W
117 of 176
3.5
C