Terminology And Symbols - Zhermack Zetaclave B 18 Manuel D'utilisation

We recommend that you read the Instruction Manual carefully before beginning to use the
device, to ensure that the operations required are carried out correctly: DO NOT carry out operations
other than those described in this booklet. The Manufacturer declines all responsibility for direct or
indirect damage to objects, persons or animals deriving from improper use of the appliance.
It is of fundamental importance for the sterilizer and the respective equipment to be used solely for
the type of product for which they were designed. We therefore request you to consult the
Declaration of Conformity of this appliance at the end of the booklet: the Class to which the
appliance belongs is indicated in the "Category" box. The" Sterilization Table" (Chap. 10) gives all
the information necessary for establishing the type of cycle to be used for sterilizing the various
instruments.

TERMINOLOGY AND SYMBOLS

1.2
It is important that you understand the following symbols and their significance as they highlight
important information such as critical situations, practical advice, or straightforward information.
If you have any doubts as to the significance of a symbol always consult this page.
• Tasks for which failure to observe instructions or tampering with machine parts may put personnel in
serious danger are highlighted by the symbol:
DANGER!
This symbol refers to safety standards which must be observed at all times in order to
protect both workers and machine.
• Critical situations concerning dangerous areas or tasks in which failure to observe the instructions
may render the warranty null and void, or cause damage to machine, connected components or the
surrounding area, are highlighted by the symbol:
WARNING!
This symbol refers to safety standards which must be observed carefully in order to
guarantee your safety, other people's safety and prevent damage to the machine.
• Any work that fails to comply with instructions in this manual, or any tampering which might
automatically render the warranty null and void, is highlighted by the following symbol:
FORBIDDEN!
This symbol refers to actions which must never be carried out (i.e. forbidden actions).
• Any general information and/or advice which may be useful at any time is highlighted by the
following symbol:
NOTE!
This symbol highlights information and/or useful advice.
140 of 228
MAINTENANCE AND USE MANUAL
EN
zetaclave B