Zhermack Zetaclave B 18 Manuel D'utilisation page 158

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

USER MENU
6.9
To access the user menu, proceed as described below:
• Switch the machine off.
• Keep SELECT pressed and switch the machine on: release the SELECT button only when the preset
language (e.g.: ENGLISH) appears on the display.
Within the user menu, the pushbuttons are used in the following manner:
• START = proceed to the next page.
• DOOR and PUMP = used to modify the settings in the pages.
SELECT = when pressed until the confirmation sound is given, it saves the pre-selected value (not all
the pages need to save the pre-selected value).
use DOOR and PUMP buttons to select the required language. Press the START/STOP button to move
on to...
This page allows you to set the time. Press the DOOR button to increase the value and the PUMP
button to decrease it; use the SELECT button to move the cursor to the value to be changed. Press the
START/STOP button to move on to...
This page allows you to set the date. Press the DOOR button to increase the value and the PUMP
button to decrease it; use the SELECT button to move the cursor to the value to be changed. Press the
START/STOP button to move on to...
This page is used to select the water filling mode. If external filling mode is used (demineraliser), set
the desired values with the DOOR and PUMP buttons, then hold the SELECT button down for 5 sec.
(until the system emits a beep), to save the setting. Press the START/STOP button to move on to...
This function allows you to save the last cycles executed by the machine with a single action. These
cycles can be either printed from the internal or external printer by holding down the SELECT button
for 5 sec. Press the START/STOP button to move on to...
The "Emergency ON" setting is reserved for specialised technical personnel.
Press the START/STOP button to return to the language setting page.
You can exit the USER MENU at any time by holding down the START/STOP button.
To restore the default settings switch the machine off with the ON/OFF control. On
restart press simultaneously SELECT and START/STOP .
158 of 228
6.9.1 ENGLISH
6.9.2 TIME: hh mm ss
6.9.3 DATE: dd mm yy
6.9.5 CHARGE WATER BY...
6.9.6 CYCLES RE-PRINT
6.9.7 EMERGENCY ON/OFF
MAINTENANCE AND USE MANUAL
EN
zetaclave B

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zetaclave b 23C306550C306552

Table des Matières