CHECKING THE OIL LEVEL
Keeping the motorbike level and in a vertical position,
check the oil level through the inspection (1) window on
the right crankcase. Make sure the level is in between
the MIN and MAX notches.
To top up, remove the filler cap (2).
Note*: Have this operation made with warm engine.
WARNING*: Be careful not to touch hot engine oil.
1
EN - 22
ENGINE OIL REPLACEMENT AND BAG FILTERS-FILTER
CARTRIDGE CLEANING OR REPLACEMENT
WARNING*: Be careful not to touch hot engine
oil.
Drain the oil with WARM ENGINE; proceed as follows:
• remove oil filler cap (1);
• remove the engine guard (A)
• place an oil drain pan under the engine block
• remove the oil drain cap (2)
• drain the used oil completely then clean the mag-
neto on the cap;
• replace the filters as described below.
MAX
MIN
2
1
2
A