Checking The Oil Level - SWM RS 650 R 2016 Manuel - Utilisation - Entretien

Masquer les pouces Voir aussi pour RS 650 R 2016:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CHECKING THE OIL LEVEL

Keeping the motorbike level and in a vertical position,
check the oil level through the inspection (1) window on
the right crankcase. Make sure the level is in between
the MIN and MAX notches.
To top up, remove the filler cap (2).
Note*: Have this operation made with warm en-
gine.
WARNING*: Be careful not to touch hot engine oil.
1
2
ENGINE OIL REPLACEMENT AND MESH FILTERS-FIL-
TER CARTRIDGE CLEANING OR REPLACEMENT
WARNING*: Be careful not to touch hot engine
oil.
Drain the oil with WARM ENGINE; proceed as follows:
• remove oil filler cap (2);
• place an oil drain pan under the engine block;
• remove the oil drain plugs (3) and (3a);
• drain the used oil completely then clean the mag-
net on the cap (3);
• remove the three metal filters (5), (6) on engine
left-hand side, and filter (7) on the right-hand
MAX
MIN
• to change filter cartridge (4) you need to loosen
• once filters are replaced, reinstall the drain plugs
CAUTION*:
Pay attention to the filter (7) reassembling di-
rection.
3a
3
4
side (between cover and crankcase), check the
O-rings for wear and wash the filters clean with
fuel; reassembly procedure is the same as for dis-
assembly, in the reverse order;
the retaining screws and remove the cover;
(3) and (3a), and fill with the specified oil quantity.
5
23
1
6
EN - 21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sm 650 r 2016

Table des Matières