CHECKING THE OIL LEVEL
Keeping the motorbike level and upright, check the
oil level through the inspection (1) window on the
right crankcase. Check that the level is in the mid-
dle of the sightglass "A" between the MIN and MAX
notch.
To fill up, remove the filler cap (2).
Note*: Have this operation made with warm engine.
WARNING*: Be careful not to touch hot engine oil.
2
1
EN - 24
MOTOR OIL REPLACEMENT
WARNING*: Be careful not to touch hot engine
oil.
Drain the oil with WARM ENGINE; proceed as follows:
• remove oil filler cap (1);
• remove the lower protection (2) by unscrewing
the screws (3) and (4);
• place an oil drain pan under the engine block
• remove the oil drain cap (5)
• drain the used oil completely then clean the mag-
neto on the cap;
• reassemble the drain cap (5) and the motor pro-
tection (2) and pour the expected oil quantity.
MAX
„A"
MIN
1
5
3
2
4