Starting The Engine - SWM SM 125 R 2020 Guide Rapide

SM125

STARTING THE ENGINE

After getting on the motorcycle as described in
the relative paragraph, operate as follows to start
the engine:
1) Place ignition key (1) to position (the buzz
that you hear when you turn the key to
caused by the fuel pump which puts the feeding
system under pressure);
2) pull the clutch lever (2);
3) shift gear pedal (3) to neutral position then
release the clutch control level;
4) check that the button (4) is in
then press the start button (5).
WARNING*:
Do not run the cold motor with a high number
of revs.
Note*: A safety switch is set on the clutch lever
support. This switch allows you to ONLY start the
engine with the gearbox idle, or with the gear
10 / EN
engaged and the clutch lever pulled.
With the stand lowered, the bike can only be
started with the gear in neutral.
is
position and
1