SWM RS 300 R 2019 Manuel - Utilisation - Entretien page 137

CLEANING
Before washing the motorcycle, it is necessary to
duly protect the following parts:
a) Rear opening of the muffler;
b) Air filter intake;
c) Clutch and brake levers, hand grips, handlebar
commutators;
d) Fork head, wheel bearings;
e) Rear suspension links.
DO NOT INSIST WITH HIGH-PRESSURE AIR OR
WATER on the ELECTRICAL PARTS and on the
INJECTION FUEL FEEDING SYSTEM, especially on
the electronic control unit (1) and the M.A.Q.S.
unit (2).
After washing:
- Lubricate the points listed in the "Maintenance
Chart" (Appendix A).
- Briefly warm up the engine
- Test the brakes before riding the motorcycle.
WARNING*: Never wax or lubricate the brake
discs. Loss of braking efficiency and an acci-
dent could result. Clean the disc with a solvent
such as acetone.
EN - 65