Getting Started With The Transmitter - ModelCraft 20 65 01 Notice D'utilisation

10. Getting started with the transmitter
Inserting the batteries/rechargeable batteries
The power supply of the transmitter requires 8 alkaline batteries (e.g. Conrad item no.: 652507, pack of 4, order
2 x) or accumulators size Mignon (AA). For ecological and also for economical reasons it is recommended to use
rechargeable batteries, since they can be recharged in the transmitter via a built-in charging socket.
The battery compartment lid is located on the bottom of the transmitter. Please press the corrugated triangle and
•
push off the cover.
Now insert the eight batteries or rechargeable batteries in the battery compartment. Pay attention to the correct
•
polarity of the cells. The negative pole (housing) of the battery or rechargeable battery must have contact with the
spiral spring.
A corresponding notice is located on the bottom of the battery compartment.
•
Afterwards slide the lid of the battery compartment back on and let the locking mechanism click into place.
•
Loading the rechargeable batteries for the transmitter
Switch off the transmitter and connect a suitable charging cable (not included in the scope of supply) to the
•
charging socket.
ATTENTION!
Connect the charger only if the rechargeable batteries are inserted in the transmitter!
The maximum charge current may not exceed 500 mA.
Conventional batteries (1.5V) must not be charged any more, there is a risk of fire and explosi-
on!
54