ModelCraft 20 65 01 Notice D'utilisation page 71

5. AFR (Adjustable Function Rate)
This menu item is not available for winged models.
Programming via the control elements:
Programming via the PC software:
If you have activated the toggle switch:
Select MODEL [ID]
•
Enter the values for the individual items.
•
Confirm the entries with the [OK].
•
Use the activated Toggle Switch [B] to switch between the two Pitch
•
Curves programmed.
AFR affects Function Channels 1 (roll), 2 (yaw) und 6 (pitch).
Unlike a servo travel limitation (EP, DR), the AFR setting limits the maxi-
mum travel of one function.
These functions are executed by all three swash plate servos via the
swash plate.
If the maximum servo travel is required for a servo to execute a function,
no further servo travel is available on this servo for the other overlying
functions. As a result, these functions will not longer be executed proper-
ly, and the model is no longer controllable. For this reason, the functional
travels are preset to 50%.
The setting range extends from +100% to -100%.
Switch the transmitter on.
•
Press the [Menu] and [Sel] buttons simultaneously.
•
In the Main Menu, use the [Menu] button to jump the item [AFR].
•
Press the [Menu] button to save
•
On the starting screen, press the [SwashAFR] button.
•
Enter via the keyboard the values desired for the Function Channels 1
•
(roll), 2 (yaw) und 6 (pitch).
Confirm the entries with the [OK].
•
70