Intended Use; Product Description - ModelCraft 20 65 01 Notice D'utilisation

2. Intended use
The 6-channel remote control system has been designed solely for private use in the model-making field and has
operating times appropriate to this use. This system is not suitable for industrial use, such as controlling machines
or equipment.
Any use other than the one described above damages the product.
Moreover, this involves dangers such as short-circuit, fire, electric shock, etc.
The remote control system must not be changed technically or modified.
The safety instructions must be observed at all times!
You are solely responsible for the safe operation of the model and the remote control!
3. Product description
In this six-channel remote control set, you own a radio remote control system that is ideally suited for primarily model
helicopters and model airplanes. However, if required, you can also use it to control model vehicles and model ships.
Its proportional control channels allow six driving, steering and control functions to be remotely controlled indepen-
dently from one another.
The remote-control transmitter provides numerous possible settings for model helicopters and planes directly via the
control elements for the transmitter. As the pilot's requirements increase, these and other functions can also be pro-
grammed on a PC via a connection cable and the software that comes with the remote-control transmitter (operating
system required: Windows XP, Windows Vista).
Each time they are switched on, the 2.4 GHz transmitter and the receiver geared to it scan the frequency band to an
available frequency for the radio contact in operation.
The high transmission frequency makes the signal from the transmitter to the receiver more susceptible to inter-
ference than with conventional systems in the MHz range. For this reason, the 2.4-GHz remote control system has
an additional receiver module, the antenna for which mounts perpendicularly to the receiver antenna. This minimises
the risk of the radio path getting interrupted.
The ergonomic housing fits comfortably into your hand and allows for an easy and safe operation of the model and
the transmitter.
Also required for operation are eight AA batteries (e.g. Conrad Order ID: 652507, four-pack, order two of them) or
rechargeable batteries for the transmitter, four AA batteries or rechargeable batteries for the receiver as well as a
receiver box. If it is an electric model, and if the controller has a BEC, no rechargeable batteries for the receiver are
required. The receiver, speed controller or piloting controller and servos are then directly supplied with voltage from
the drive battery or flight battery.
47