6. REV (Reverse)
Programming via the control elements and the PC software:
What is shown on the display and the programming correspond to that described for winged models under Main
Menu Item 3.
7. SUB (Subtrim)
Programming via the control elements and the PC software:
What is shown on the display and the programming correspond to that described for winged models under Main
Menu Item 4.
8. Type (model type)
Programming via the control elements:
Programming via the PC software:
71
After preselecting the main menu items (mixer functions) for helicopter
models, here you can select the settings for three different swash plate
controls.
Switch the transmitter on.
•
Press the [Menu] and [Sel] buttons simultaneously.
•
In the Main Menu, use the [Menu] button to jump the item [TYPE].
•
Use the [Sel] button to select the model desired H 120, H 90 or H
•
140.
Press the [Menu] button to save
•
On the starting screen, press the [TYPE] button.
•
Scroll to the helicopter model desired.
•
Confirm the selection with [OK].
•