Commissioning; Safety Information; Adjustment And Functions - Burkert 8032 Manuel D'utilisation

commissioning

Commissioning
8. commissioninG
8.1.

safety information

Warning
Danger due to nonconforming commissioning.
Nonconforming commissioning could lead to injuries and damage
the device and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be commissioned by suitably
trained staff.
note
risk of damage to the device due to the environment
• Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of the
climatic conditions.
• When the device is switched on and the cover is open,
protection against electric shock is no longer guaranteed.
• Check the chemical compatibility between the fluid to
be measured and the materials from which the device is
made exposed to it.
9. ADjusTmenT AnD
funcTions
9.1.

safety information

danger
risk of injury due to electrical voltage
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
Warning
risk of injury due to nonconforming adjustment.
Nonconforming adjustment could lead to injuries and damage the
device and its surroundings.
• The operators in charge of adjustment must have read and
understood the contents of this manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be adjusted by suitably trained
staff.
• Before commissioning the device, enter the K factor of the fit-
ting used. See chap. 9.4 and 9.5.
English
27