10.3. If You Encounter Problems - Burkert 8032 Manuel D'utilisation

maintenance and troubleshooting
Maintenanceandtroubleshooting

10.3. if you encounter problems

message 4-20 mA output,
displayed if present
ERR 2 22 mA
ERR 11 -
meaning
The Parameters menu cannot be accessed.
Read fault of the menu: the process is not stopped.
The span and/or offset values entered during
adjustment of the 4-20 mA output are out of range:
offset < 3 mA or > 5 mA
and/or span <18,5 mA or > 21,5 mA
recommended actio
→
Press the ENTER key to acknowledge the
message.
→
If the failure occurs regularly, contact your
retailer.
→
Press the ENTER key to go back to the Test
menu.
The device operates with the previous adjustment
values.
English
43