Operating And Commissioning; Safety Instructions - Burkert 8228 Mode D'emploi

Operatingandcommissioning
Load 1
white
2
blue
3 1
4
black
- +
1 4-20 mA input
st
at external instru-
ment
Fig. 17: PNP wiring of both transistor outputs and wiring of both current
outputs in sourcing mode, on a version with 2 fixed connectors
(parameter setting "PNP/source")
Type 8228
Load 2
white
2
brown
blue
1 3
4
grey
-
- +
12-36 V DC
Power supply 2 4-20 mA
nd
input at external
instrument
9

operATinG AnD commissioninG

• The settings can only be done on a device with a display
module.
• Do not remove the display module while making the set-
tings on the device.
9.1

safety instructions

Warning
risk of injury due to non-conforming operating.
Non-conforming operating could lead to injuries and damage the
device and its surroundings.
▶ The operators in charge of operating must have read and under-
stood the contents of this manual.
▶ In particular, observe the safety recommendations and intended
use.
▶ The device/installation must only be operated by suitably trained
staff.
+
English
21