Installation Onto The Pipe; Diagrams - Burkert 8032 Manuel D'utilisation

installation and wiring
Installationandwiring
Warning
risk of injury due to nonconforming installation.
• The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
• Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
• Respect the assembly instructions for the fitting used.
risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activation of
the installation.
• Guarantee a set or controlled restarting of the process subse-
quent to any intervention on the device.
To ensure that the device runs correctly, plug in and tighten
the connectors.
7.2.

installation onto the pipe

7.2.1.

Diagrams

These diagrams are used to determine the DN of the fitting (only
for a threshold detector / flowmeter 8032) appropriate to the appli-
cation, according to the fluid velocity and the flow rate.
Flow rate
l/s
l/min
m 3 /h
100
5000
200
50
100
1000
50
10
500
20
5
10
100
5
1
50
2
0.5
20
1
10
0.5
0.1
5
3
0.05
0.2
2
0.1
1
0.05
0.01
0.5
0.005 0.02
0.3
0.2
0.01
0.1 0.2 0.3 0.5
English
DN 50 (DN65)*
DN 40 (DN50)*
DN 32 (DN40)*
DN 25 (DN32)*
DN 20 (DN25)*
DN 15 (DN15 / DN20)*
DN 08
DN 06
m/s
1 2 3 5 10
Flow velocity
15