Publicité
3
Features and Functions
Carrier Waveform Shape
– AM carrier shape: Sine or Square waveform. The default is Sine. You cannot
– Front-Panel Operation: Press either the
– Remote Interface Operation:
Carrier Frequency
The maximum carrier frequency depends on the function selected as shown
below. The default is 1 kHz for all functions.
– Front-Panel Operation: To set the carrier frequency, press the Freq softkey for
– Remote Interface Operation:
90
use ramp, pulse, noise, dc, or arbitrary as the carrier waveform.
key.
FUNCtion {SINusoid|SQUare}
You can also use the APPLy command to select the function, frequency,
amplitude, and offset with a single command.
Function
Sine
Square
the selected function. Then use the knob or numeric keypad to enter the
desired frequency.
FREQuency {<frequency>|MINimum|MAXimum}
You can also use the APPLy command to select the function, frequency,
amplitude, and offset with a single command.
Minimum Frequency
1 mHz
1 mHz
or the
front-panel function
Maximum Frequency
10 MHz
10 MHz
Keysight 33210A User's Guide
Publicité
