Publicité
1
Quick Start
To Output a Stored Arbitrary Waveform
Arbitrary waveforms are optionally available with the 33210A (Option 002). To
NOTE
upgrade your 33210A to include arbitrary waveform functionality, go to
www.keysight.com/find/33210U.
There are five built-in arbitrary waveforms stored in non-volatile memory.
The following steps show you how to output the built-in "exponential fall" waveform
from the front panel.
For information on creating a custom arbitrary waveform, refer to
NOTE
Store an Arbitrary
1 Select the arbitrary waveform function.
2 Select the active waveform.
38
Waveform" on page 130.
When you press the
a temporary message is displayed indicating which waveform is currently
selected (the default is "exponential rise").
Press the Select Wform softkey and then press the Built-In softkey to select
from the five built-in waveforms. Then press the Exp Fall softkey. The
waveform is output using the present settings for frequency, amplitude, and
offset unless you change them.
The selected waveform is now assigned to the
this key, the selected arbitrary waveform is output. To quickly determine which
arbitrary waveform is currently selected, press
key to select the arbitrary waveform function,
"To Create and
key. Whenever you press
.
Keysight 33210A User's Guide
Publicité
