Publicité
3
Features and Functions
– Remote Interface Operation:
Symmetry (Ramp Waves)
Applies to ramp waves only. Symmetry represents the amount of time per cycle
that the ramp wave is rising (assuming that the waveform is not inverted).
– The symmetry is stored in volatile memory; the symmetry is set to 100% (the
– The symmetry setting is remembered when you change from ramp wave to
– If use select a ramp waveform as the modulating waveform for AM, FM, or
– Front-Panel Operation: After selecting the ramp function, press the Symmetry
– Remote Interface Operation:
80
FUNCtion:SQUare:DCYCle {<percent>|MINimum|MAXimum}
The APPLy command automatically sets the duty cycle to 50%.
0% Symmetry
100% Symmetry
default) when power has been off or after a remote interface reset (assuming
the Power On state is set to "default").
another function. When you return to the ramp function, the previous
symmetry is used.
PWM, the symmetry setting does not apply.
softkey. Then use the knob or numeric keypad to enter the desired symmetry.
FUNCtion:RAMP:SYMMetry {<percent>|MINimum|MAXimum}
The APPLy command automatically sets the symmetry to 100%.
Keysight 33210A User's Guide
Publicité
