Publicité
3
Features and Functions
Introduction
This chapter makes it easy to look up all the details about a particular feature of
the function generator. It covers both front panel and remote interface operation.
You may want to read
Chapter 4, "Remote Interface Reference"
the SCPI commands to program the function generator. This chapter is divided
into the following sections:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Throughout this manual "default" states and values are identified. These are the
NOTE
power-on default states provided you have not enabled the power-down recall
mode (see
68
Chapter 2, "Front-Panel Menu
Output Configuration
Pulse Waveforms
on page 85
Amplitude Modulation (AM)
Frequency Modulation (FM)
Pulse Width Modulation (PWM)
Frequency Sweep
on page 107
Burst Mode
on page 114
Triggering
on page 123
Optional Arbitrary Waveforms (Option 002)
System-Related Operations
Remote Interface Configuration
External Timebase Reference (Option 001)
Calibration Overview
Factory Default Settings
"Instrument State Storage"
for a detailed discussion of the syntax of
on page 70
on page 89
on page 94
on page 101
on page 136
on page 145
on page 157
on page 161
on page 136).
Operation", first. See
on page 129
on page 155
Keysight 33210A User's Guide
Publicité
